Use your landline phone with ConnectLine

ConnectLine can be used with Alta2, Nera2, Ria2, Dynamo and Sensei hearing aids. If you have Opn hearing aids, click here.

Getting started with ConnectLine and your landline phone
The ConnectLine phone adapter makes it possible to use Streamer Pro with a traditional analog landline phone. The solution supports both incoming and outgoing phone calls. During a phone call, your hearing aids are used as a headset. Streamer Pro, which you wear around your neck, is used as a microphone. Together, they enable hands-free operation.

Installing the phone adapter
To connect the ConnectLine phone adapter to a phone line and landline phone, place the phone adapter in a suitable spot near your landline phone or base station.

• Connect the phone adapter to a power outlet.
• Unplug the phone line from the landline phone (or base station) and plug it into the phone adapter “IN” connector
• Take the phone cord that came with the phone adapter, and plug it into the phone adapter “OUT” connector and into the landline phone (or base station).
• Lift the handset from your landline phone – you should now be able to hear the dial tone from the handset speaker.
•Then pair the streamer with the phone adapter.

Briefly press the phone button on the streamer (A) to answer the call. You will hear a small confirmation beep in your hearing aids. The phone button and status indicator on the streamer and the phone indicator on the phone adaptor will now be steady green. To end the call, simply briefly press the phone button on the streamer and the green phone button on the streamer turns off.

Note: If your main phone or base station does not have a detachable plug for the landline connection, you should either try using an alternative phone or contact a technician to complete the installation.

To make a call, briefly press the Streamer’s phone button (A). You will hear a dial tone in the hearing aids. The phone button on the Streamer and phone indicator on the phone adaptor will turn steady green.

Pick up the handset on your landline home phone (or press “Call” on the portable phone) and dial the phone number (B) as you normally do to make a call.

After a short while you will hear the call tone in your hearing aids indicating that the call is now connected through your Streamer and hearing aids. You can now put the handset back on (or press “end call” on the cordless phone).

To end the call, simply briefly press the phone button on the Streamer.